Realme 5 Pro RMX1971 Stock ROM (Firmware Flash File)

Realme 5 Pro RMX1971 Stock ROM (Firmware Flash File). We’ll show you how to install stock ROM on your Realme 5 Pro in this article (Model No: RMX1971). The instructions are straightforward and simple to follow. You can view the entire video tutorial here.

A large number of smartphone fans are interested in learning about the technological elements of smartphones these days. As a result, they continue to adjust the phone’s hardware and software. Unfortunately, they occasionally brick their smartphone.

Realme 5 Pro RMX1971 Stock ROM (Firmware Flash File)

As we all know, when a phone is bricked, it stops working and becomes a paperweight. This is something that can happen to any smartphone. This was an issue for several of our readers with their Realme 5 Pro (RMX1971). So, in this post, we’ll show you how to flash the stock ROM on your Realme 5 Pro. We’ve included the installation tutorial as well as the download link for the appropriate ROM. So, have a look.

Realme 5 Pro Specifications: Overview

The Realme 5 Pro smartphone was only released in India a few days ago. It has a 6.3-inch display with a resolution of 1080×2340 pixels. It has a Qualcomm Snapdragon 712 AIE SoC with a 2.3GHz octa-core processor, 4GB of RAM, and 64GB of internal storage. A MicroSD card slot will allow for storage expansion up to 256GB. The gadget comes pre-installed with ColorOS 6.0, which is based on Android 9.0 Pie.

It’s a dual Nano-SIM handset with a 4,035 mAh battery and Oppo VOOC rapid charging capabilities. A 48MP main camera (f/1.8), an 8MP sensor (f/2.25), a third 2MP sensor (f/2.4), and a fourth 2MP sensor (f/2.24), as well as an LED flashlight, are included in the smartphone. PDAF, Panorama, AI portrait mode, HDR, and other functions are also included. While a single 16MP selfie camera with an f/2.0 aperture lens on the front offers AI Face Unlock, AI Portrait mode, and other features.

Wi-Fi 802.11 a/b/g/n/ac, GPS, Bluetooth 5.0, USB Type-C connector, USB OTG, a 3.5mm headphone jack, 3G/4G LTE, and other features are available on the Realme 5 Pro. There’s also an accelerometer, ambient light sensor, compass, gyro, proximity sensor, and a fingerprint sensor on the back of the phone. The phone is 157.0074.208.90mm in length and weighs 184 grams.

Importance of Stock Firmware

Stock ROM is always been an important part of smartphones. When you move to stock ROM, you can fix up a lot of problems. We have listed the sam below.

• With the help of stock ROM, You can unbrick your Realme 5 Pro.
• Solve the boot loop issue on Realme 5 Pro (RMX1971).
• You can bypass system Lock and Screen Lock
• Removes any possible case of spyware or Adware in your devices.
• To fix any bugs on your Realme 5 Pro.

Firmware Details:

• Device Supported: Realme 5 Pro (RMX1971)
• Tool Supported: QFIL Flash tool or Use QCom Download Tool | MSMDownload Tool or Miracle Box
• Processor: Qualcomm Snapdragon 712 SoC
• Android OS: 9.0 Pie
• File: Software Update

How to Install Stock ROM on Realme 5 Pro (RMX1971)

Before we begin, we must first obtain the ROM file for the target device, the Realme 5 Pro. The download link for the same may be found here.

Download Stock ROM File

Pre-Requirements:

• Supported device: Realme 5 Pro.
• Make sure to charge your device more than 50%
• You need a PC or Laptop with a USB cable.
• Take a complete backup using any method given below
  • Full Data Backup without Root
  • Nandroid Backup via TWRP
• Download Drivers and Tools: Qualcomm USB drivers, QFil Flash Tool or QPST, and Realme USB Drivers

Method 3: Instructions to Install via QFIL Tool:

On your computer, install the Qualcomm Flash image loader utility and USB drivers. To use the QFIL tool to install the firmware, click the link below.

Steps to Flash Stock Firmware Using QFil Flash Tool

Method 2: Instructions to Install via MSM Download Tool

On your computer, install the MSM Download Tool and Qualcomm USB Drivers. To use the MSM Download tool to install the firmware, click the link below.

Flash Realme Firmware via MSM download tool

Method 3: Instructions to Install via QPST Tool:

QPST Flash Tool

All devices that are powered by Qualcomm Chipset are supported by the QPST Tool. This tool helps you to download and flash the new stock firmware for your device. The QPST tool is free to download and is very easy to use. All features are free of charge on this device. You don’t have anything to pay for.

Simply download and install the software on your Windows computer and use an easy method to flash your Qualcomm devices. Here on this page we managed all versions of QPST Flash Tool (Qualcomm Product Support Tools) and provide direct download links for downloading the setup file from our official servers. Choose the version and click the download button to get the setup file downloaded.

QPST Flash Tool Features:

There are some interesting features that make the QPST Tool better than any other software. The list of some of my favorite features in this tool is shown below:

• Installation: The Package installer makes this tool easy to install. So you need to install it on your Windows computer by double-clicking on the setup file before using this method.
• Configuration: This tool allows you to control activities such as “Active Devices, Active Clients, and also Serial Ports Available”
• Service Programming: This tool also allows you to save programming server data to flash the same programming service file on multiple devices.
• Download Firmware: It lets you download and flash the latest stock firmware for your Qualcomm device on the required device.

Requirements:

• Qualcomm Android USB Driver
• Supported Windows OS (Windows 7,8,10)