Huawei Honor Play 9A MOA-AL20 Firmware Flash File (Stock ROM)

Huawei Honor Play 9A MOA-AL20 Firmware Flash File (Stock ROM). In the year 2020, Huawei Honor Play 9A was released, and it came with Android 10 and Magic UI 3. A Mediatek MT6765 Helio P35 processor powers it. We’ll show you how to flash the stock firmware file for the Honor Play 9A MOA-AL20 in this article.

You’ll need to download the Huawei Flash tool to install the firmware flash file on the Honor Play 9A MOA-AL20. This procedure is basic and straightforward.

Advantages of Stock ROM:

The following are the reasons why you should save and download the Honor Play 9A MOA-AL20 Stock ROM flash file to your computer.

• You can use the Stock ROM file to unbrick your device if it’s dead.
• DB files from Stock ROM can be used to fix or repair the IMEI on your device.
• Honor Play 9A should be free of any malware or adware.
• On the Honor Play 9A, you can fix the boot loop problem.
• Fix On the Honor Play 9A, the app has unfortunately stopped generating errors.
• Fix a network-related problem
• Using Magisk, patch the Boot image to the root directory.
• To reset or remove FRP on your Honor Play 9A, you can unroot it.
• Restore the factory state of Honor Play 9A.

Huawei Honor Play 9A MOA-AL20 Firmware Flash Files:

Pre-Requirements:

• Huawei Honor Honor Play 9A is a supported device.
• Make sure your device is charged to at least 50%.
• A USB cable and a PC or laptop are required.
• Make a full backup using any of the methods listed below
  • Without the need for root access, you can backup all of your data.
  • TWRP Backup for Nandroid
• Install the Huawei Multi-Download Tool on your computer.
• Install Huawei USB Drivers on your computer.
• Additionally, you’ll require Download and install the Huawei Handset Product Line Driver.

Firmware Installation Guide:

SD Card Update Method

For the Honor Play 9A MOA-AL20, see the firmware flashing procedure below.

• On your MicroSD card, make a new folder called dload.
• Copy the UPDATE.APP file into the dload folder on your MicroSD card after extracting the firmware zip file on your PC.
• Turn off your phone > Hold down the Vol Up, Vol Down, and Power keys for a few seconds until the fastboot mode appears.
• You’ll notice a message that says ‘Installing system update’ > Wait a few moments > After flashing, your device will reboot automatically.

Manually Flash Stock ROM

1. To begin, download the Huawei smartphone Multi Download Tool to your computer and extract it.
2. Now, on your PC, download and install the Huawei Handset Product Line Driver as well as the Huawei USB Driver.
3. To use the Huawei Multi-Download Tool, run the QPBLFBML01.exe program.
4. The XML firmware file upload option will appear next.
5. When you click the Browse button (three-dot icon), it will prompt you for your password.
6. Don’t fill it in; simply leave it blank and press the Set button.
7. Now, click Open to open the.xml firmware file for your device.
8. After that, press the Next button.
9. The installation progress page will appear. With the Fastboot or Download Mode, connect your device via USB connection.
10. To begin flashing the stock firmware, click the Scan&Download button.
11. It will automatically detect and install the Fastboot device, which will take some time.
12. Restart your device after the flashing is complete.