Wednesday, June 12, 2024
HomeFirmwareSamsung J5 SM-J530F Firmware Flash File (Stock ROM)

Samsung J5 SM-J530F Firmware Flash File (Stock ROM)

Samsung J5 SM-J530F Firmware Flash File (Stock ROM). In this article, we’ll show you how to use the Samsung flash tool to install the Samsung SM-J530F (Galaxy J5 2017) flash file (also known as the ODIN flash tool). This page contains the official stock firmware file, drivers, and flash tool for the Samsung Galaxy J5 2017 SM-J530F.

Samsung J5

You can always repair device software issues such as boot loop, lag, soft brick or hard brick, remove pattern lock, FRP lock, and many more by flashing the Stock ROM file.

Samsung Galaxy J5 2017 SM-J530F Firmware Flash Files:

Software DetailsDownload Links
Flash File Name:

Build Number: J530FXXU1AQF5

Model: SM-J530F

Android Version: 7.0 Nougat

Flash File Name:

Build Number: J530FXXS5BSE3

Model: SM-J530F

Android Version: 8.1 Oreo

Flash File Name:

Build Number: J530FXXU4BSC2

Model: SM-J530F

Android Version:8.1 Oreo

Warning: We at Mobile Remarks are not liable for any damage or errors that arise to your phone as a result of following this tutorial or flashing any files. You do so at your own risk.

Steps to Flash Stock ROM File on Galaxy J5 2017 SM-J530F

Let’s have a look at the pre-requisites before we get started with the procedures to install stock firmware on your Samsung Galaxy J5 2017.


  • The Samsung Galaxy J5 SM-J530F is the subject of this guide (Canada)
  • To flash the firmware, you’ll need a Windows PC/Laptop and a USB connection.
  • Charge your smartphone till it has a minimum of 50% battery life.
  • You must download and install the most recent Samsung USB Drivers on your computer.
  • Check to see if you have the ODIN software installed on your computer.
  • Before you do anything, make a backup of your device (no root).

Let’s look at how to flash stock ROM on a J5 SM-J530F now.

Installation Guide

  1. The Samsung J5 SM-J530F Flash file may be downloaded here.
  2. The contents of the firmware flash file zip should be extracted.
  3. Start the ODIN program.
  4. In the relevant area, load the firmware files.
  5. Connect your phone to the computer after it has loaded (make sure to boot your device into download mode)
  6. When you connect your phone to Odin, the CO port will light up.
  7. To install the firmware on your Samsung smartphone, press the Start button.
  8. That concludes our discussion. Once the installation is complete, you will get a PASS message.
Hi, I am Muhammad Tayyab known as Vampire Hacker from Narowal, Pakistan. I love to face Technical Challenges.

Leave a Reply

Most Popular