Samsung Galaxy J6 Firmware Flash File (Stock ROM). Do you want to install Samsung Galaxy J6 Stock ROM? If that’s the case, you’ve come to the correct spot. All of the most recent Galaxy J6 Stock Firmware Collections will be available here. We’ve compiled a comprehensive list of firmware download and installation links for the Samsung Galaxy J6. As we all know, Android is a very configurable operating system, and there’s a chance we’ll wind up with latency, boot loops, or soft bricks. Then this guide will come in handy. It’s always a good idea to have the Samsung Galaxy J6 Stock Firmware on hand in case something goes wrong.
Table of Contents
Samsung Galaxy J6 Stock Firmware Flash File (Stock ROM)
You can factory reset or flash the newest Galaxy J6 Stock Firmware if you have issues like screen freezing, unresponsive touch, camera failure, or boot loop. Take a look at the additional benefits of Stock Firmware listed below.
The Samsung Galaxy J6 has a 5.6-inch Super AMOLED display with a screen resolution of 720 x 1480 pixels and an aspect ratio of 18:5. The smartphone is equipped with a 1.6 GHz Octa-Core Cortex-A5 Exynos 7870 Octa processor and 3GB/4GB RAM. The phone comes with 32/64GB of internal memory that can be extended up to 256GB with a microSD card. The Samsung Galaxy J6 has a 13-megapixel back camera and an 8-megapixel front-facing camera with LED flash. The Samsung Galaxy J6 comes with a non-removable Li-Ion 3000 mAh battery and runs on Android 8.0 Oreo out of the box. On the back, there’s also a fingerprint sensor.
The Advantage of Stock Firmware
- Flash Stock To Unbrick your Samsung Galaxy J6
- Flash Stock ROM to Fix the boot loop problem
- Upgrade and Downgrade Samsung Galaxy J6
- Unroot or Fix Bugs on your phone
- To fix the lag or stutter on Samsung Galaxy J6
- By flashing Stock ROM, you can solve software problems.
- Revert back to stock to gain your warranty.
List of Galaxy J6 Stock Firmware Collections:
Build Number | OS | Security Patch |
J600GUBS6BTA4 | 9.0 | February 2020 Patch |
J600GDXS6BTB2 | 9.0 | February 2020 Patch |
J600FNXXS7BTB3 | 9.0 | February 2020 Patch |
J600GTVJU7BTB2 | 9.0 | February 2020 Patch |
J600GUBU6CTC8 | 10 | Android 10 |
J600FXXU7CTC8 | 10 | Android 10 |
J600FPUU7CTC8 | 10 | Android 10 |
J600FNXXU7CTC8 | 10 | Android 10 |
J600FXXU7CTC9 | 10 | Android 10 |
J600GTVJU7CTC8 | 10 | Android 10 |
J600GDXU6CTCA | 10 | Android 10 |
J600FNXXS7CTE1 | 10 | May 2020 Security Patch |
J600FNXXS8CTE5 | 10 | May 2020 Security Patch |
J600FXXU8CTF1 | 10 | June 2020 Security Patch |
J600FNXXU8CTF5 | 10 | June 2020 Security Patch |
Steps to Install Galaxy J6 Stock Firmware:
Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.
Required Odin and Drivers:
- Download and Install Samsung Kies Software
- Make sure to download Samsung USB Drivers and install them on your PC.
- Click to Download ODIN Software
Pre-Requirements:
- The Samsung Galaxy J6 is the subject of this guide (Canada)
- To flash the firmware, you’ll need a Windows PC/Laptop and a USB connection.
- Charge your smartphone till it has a minimum of 50% battery life.
- You must download and install the most recent Samsung USB Drivers on your computer.
- Check to see if you have the ODIN software installed on your computer.
- Before you do anything, make a backup of your device (no root).
Let’s look at how to flash stock ROM on a J6 now.
Installation Guide
- The Samsung J6 Flash file may be downloaded here.
- The contents of the firmware flash file zip should be extracted.
- Start the ODIN program.
- In the relevant area, load the firmware files.
- Connect your phone to the computer after it has loaded (make sure to boot your device into download mode)
- When you connect your phone to Odin, the CO port will light up.
- To install the firmware on your Samsung smartphone, press the Start button.
- That concludes our discussion. Once the installation is complete, you will get a PASS message.