Realme C3 Firmware Flash File (Stock ROM)

Realme C3 Firmware Flash File (Stock ROM). While following this tutorial to install stock ROM on your phone, Mobile Remarks will not be held liable for any bricking, hardware, or software issues that may arise. Understand the instruction first, then proceed at your own risk.

Most Android users strive to modify their smartphones by flashing modified firmware, rooting, or installing custom modules, among other things. All of these activities are now readily performed by developers and certain advanced users. However, novice users may have difficulty personalizing their devices, and the majority of them make mistakes while flashing any custom file. As a result, most beginners experience problems, brick their devices, or become trapped in a bootloop.

Realme C3 Firmware Flash File (Stock ROM)

If you’re one of them and wish to unbrick your phone or restore it to factory settings, you may easily install the original Stock Firmware on your Realme C3 (RMX2020/RMX2027). However, for a successful flashing, make sure to follow all of the prerequisites and step-by-step instructions. Because the Realme C3 has a MediaTek chipset, we’ll use the SP Flash Tool technique in this instruction. Let’s have a look at the device overview that follows.

Realme C3 Specifications

It has a 6.5-inch IPS LCD display with HD+ (7201560 pixels) resolution, a 20:9 aspect ratio, and Corning Gorilla Glass 3 protection, as well as a 20:9 aspect ratio. The phone comes pre-installed with Android 10 and Realme UI 1.0. It has an octa-core MediaTek Helio G70 SoC with Mali-G52 2EEMC2 GPU, 2GB/3GB/4GB of RAM, and 32GB/64GB of internal storage (a dedicated MicroSD card slot).

The phone has a dual back camera configuration with a 12MP (wide, f/1.8) and a 2MP (depth, f/2.4) lens, as well as PDAF, HDR, Panorama, an LED flash, and other features. It can record video at a resolution of up to 1080p@30fps. On the front, there’s a 5MP (wide, f/2.4) selfie camera with HDR, Panorama mode, and 1080p@30fps video recording, as well as a 5MP (wide, f/2.4) rear camera.

The gadget features a 3.5mm audio jack, Wi-Fi 802.11 b/g/n, Bluetooth 5.0, GPS, A-GPS, GLONASS, BDS, FM Radio, MicroUSB 2.0, USB OTG, and other communication options. The phone has a 5,000mAh battery and supports 10W charging. It features several sensors, including an accelerometer, proximity sensor, and compass sensor, among others.

Steps to Install Stock ROM on Realme C3

You should obtain the firmware file before installing the stock ROM on your Realme C3. Then, on the PC, download and install the USB Drivers and flash tool. After you’ve completed them, you can go on to the stages below. But first, let’s have a look at the relevance of Stock Firmware and the firmware information below.

Stock ROM Advantages

On a smartphone or tablet device that runs on an operating system like Android OS, the stock ROM is installed by default. For each model, all device OEMs supply a custom-developed and suitable firmware version. It also provides a more reliable and better user experience, which Custom Firmware may not provide.

• Fix the Realme C3’s bootloop issue
• Has your Realme C3 been bricked? By following this guide, you will be able to unbrick your computer.
• On the Realme C3, you may upgrade or downgrade the software version.
• Can the smartphone be unrooted?
• Fix any flaws or difficulties with the software.
• If the gadget is still under warranty, you can get it back.

Firmware Details:

• Device Name: Realme C3
• Model No: RMX2020, RMX2027
• ROM Type: Stock ROM
• Gapps File: Included
• Tool Supported: SP Flash Tool
• Processor: MediaTek Helio G70
• Android Version: Android 10
• Firmware Version: RMX2027_11.A.55

Downloads Required:

• Flash Tool – SP Flash Tool
• Realme USB Drivers

Pre-Requirements:

We’ll presume you’ve already downloaded the firmware and installed the necessary drivers and utilities on your computer.

• This Stock ROM download is only for the Realme C3 smartphone model.
• Attempt to charge your smartphone to at least 60% capacity.
• Before you do anything, do a full data backup without root.
  • Keep a Nandroid Backup using TWRP if TWRP Recovery is already installed.
• A computer and a USB data cord are required.

Instructions to Install

After you’ve downloaded the Realme C3 firmware file, you’ll need to utilize SP Flash Tool to flash it. Don’t worry if you’re doing it for the first time. Here’s a step-by-step tutorial on flashing stock firmware on the Realme C3.

Method 1: Instructions to Install via Recovery:

To begin, use the official Realme device recovery procedure to install the OTA stock ROM update. To install the OTA update on your Realme device, go to the URL provided below.

How to Flash Realme Firmware on your device [Software update guide]

Method 2: Instructions to Install via SP Flash Tool

We hope you were able to successfully install the stock ROM on your Realme C3. If you run into any problems during the flashing procedure, please let us know in the comments. We will be delighted to help you. Thank you for visiting, and have a wonderful day!