Realme 2 Pro RMX1801 Stock ROM File (Firmware Flash Guide)

Realme 2 Pro RMX1801 Stock ROM File (Firmware Flash Guide). All of the Realme 2 Pro Flash files, as well as the firmware installation tutorial, are available on this website. To flash the stock ROM on your smartphone, we’ll need a software named QFil Flash tool or any other tool that can let us flash the firmware flash file. The procedure is basic and straightforward.

This method may be used to fix a bricked device, fix the lag or shuttering performance, unroot or circumvent the FRP lock, and fix Bluetooth and WiFi problems. So, without spending any more time, let’s figure out what a stock firmware flash file is.

Realme 2 Pro RMX1801 Stock ROM File (Firmware Flash Guide)

The Oppo Realme 2 Pro has a 6.3-inch IPS display with a screen resolution of 1080 x 2340 pixels, according to the specs. It is equipped with a Qualcomm Snapdragon 660 processor, which is a 64-bit processor with 4/6/8GB of RAM. The phone has a 64/128GB internal memory and 256GB of additional storage through a microSD card. The Oppo Realme 2 Pro has a dual 16MP + 2MP back camera with dual-LED dual-tone flash, as well as a 16MP front camera for selfies. A non-removable Li-Po 3500 mAh battery powers it. On the rear of the Oppo Realme 2, Pro is a fingerprint sensor.

The Advantage Of Stock ROM:

• Flash Stock To Unbrick your Oppo Realme 2 Pro
• Flash Stock ROM to Fix the boot loop problem
• Upgrade and Downgrade Oppo Realme 2 Pro
• Unroot or Fix Bugs on your phone
• To fix the lag or stutter on Oppo Realme 2 Pro
• By flashing Stock ROM, you can solve software problems.
• Revert back to stock to gain your warranty.

Firmware Details:

• Gapps File: Included
• Device Supported: Oppo Realme 2 Pro – RMX1801 / RMX1803 / RMX1807
• Tool Supported: QFIL
• SoC: Qualcomm Snapdragon 660
• Language Supported: Multi-Language
• Android OS: 8.1 Oreo

Download Flash Files

Steps to Install Stock firmware on Oppo Realme 2 Pro :

On your computer, install the Qualcomm Flash image loader utility and USB drivers. To use the QFIL tool to install the firmware, click the link below.

Pre-Requirements

• This ROM is exclusively for the Realme 2 Pro RMX1801. Don’t use it on other devices.
• Charge your phone completely before installing the ROM.
• A Windows PC/Laptop
• Download and install Realme USB drivers on your Windows PC.
• Download QFil Tool or QPST Flash tool and install it on your PC.
• It is always recommended to take a backup of your Android Device.
• Backup Android Phone Without Root on any device
• If you have TWRP Recovery, Create and Restore Nandroid Backup using TWRP Recovery

Method 1: Install via QFIL Tool:

On your computer, install the Qualcomm Flash image loader utility and USB drivers. To use the QFIL tool to install the firmware, click the link below.

Guide to Install Stock ROM using QFIL Tool

Method 2: Install via MSMDownload Tool

1. On your PC, download the MSM Download utility, firmware, and drivers.
2. Install the USB drivers now.
3. Put the firmware and the MSM download tool in the same folder.
4. Connect your device to your PC/Laptop using the MSM download program.
5. If you don’t choose the firmware manually, it will load automatically once you connect.
6. Wait patiently for the installation procedure to finish after clicking the start button.
7. Once it’s completed! Remove the device from the computer. That concludes our discussion.