Friday, July 19, 2024
HomeFirmwareXiaomi Redmi 9T Stock Firmware Flash File

Xiaomi Redmi 9T Stock Firmware Flash File

Xiaomi Redmi 9T Stock Firmware Flash FileAll of the newest Xiaomi Redmi 9T (codenamed lime) firmware flash files can be found on this page. Xiaomi Mi Flash Tool, which works on Windows, Mac, and Linux, is required to flash the firmware file. To flash the firmware stock ROM file on Xiaomi Redmi 9T, follow this instruction.

An inexpensive Redmi device was said to be coming in the first month of 2021, and we now have it in the form of the Xiaomi Redmi 9T. The Xiaomi Redmi 9T was presented to the public in January, and we now have all of the details on this new affordable Redmi gadget. So, what can we expect from this new Redmi gadget in 2021? In this article, we’ll discover out.

Xiaomi Redmi 9T Stock Firmware Flash File

Xiaomi Redmi 9T

Xiaomi Redmi 9T Device Overview:

The Xiaomi Redmi 9T has a 6.53-inch IPS LCD display with a 1080 x 2340-pixel resolution. Corning Gorilla Glass 3 protects the display, which can reach a brightness of 400 nits. The Qualcomm Snapdragon 662 processor, which is built on an 11nm manufacturing process, is found inside the smartphone. This is a year-old chip built for mid-range handsets, and Xiaomi is clearly attempting to save money by including an old processor with this smartphone. It has four Kryo 260 Gold cores clocked at 2.0 GHz and four Kryo 260 Silver cores clocked at 1.8 GHz, making it an octa-core processor.

The rear camera is a quad-camera arrangement, while the front camera is a single low-megapixel camera. A 48MP primary sensor with an f/1.8 lens, an 8MP ultrawide sensor with an f/2.2 lens, a 2MP macro sensor with an f/2.4 lens, and a 2MP depth sensor with an f/2.4 lens make up the quad-camera configuration. Only a signal 8MP sensor and an f/2.1 lens are available on the front. Only 1080p video can be recorded in both the front and back setups.

The phone comes pre-installed with Android 10 and the MIUI 12 skin on top. The smartphone comes with three storage options: 64GB + 4GB RAM, 128GB + 4GB RAM, and 128GB + 6GB RAM. There is also a dedicated microSD expansion slot. Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, NFC, Infrared connector, FM radio, and USB Type-C 2.0 are among the connectivity options. The Redmi 9T’s battery is massive, having a capacity of 6,000 mAh. 18W rapid charging and 2.5 reverse wired charging are also supported. Carbon Gray, Twilight Blue, Sunrise Orange, and Ocean Green are the four colour possibilities for the smartphone.

Advantages of Stock ROM:

The reasons why you should download and save the Redmi 9T Stock ROM flash file to your PC are as follows.

  • You may use the Stock ROM file to unbrick your smartphone if it’s dead.
  • DB files from Stock ROM may be used to fix or repair the IMEI on your device.
  • Remove any viruses or adware from your Redmi 9T smartphone.
  • The boot loop issue of the Redmi 9T may be resolved. On the Redmi 9T, the app has unfortunately ceased working.
  • Fix a network-related problem
  • Using Magisk, patch the Boot image to the root directory.
  • The Redmi 9T may be unrooted.
  • To Reset or Remove FRP on your smartphone, follow these steps:
  • Restore the factory settings of the Redmi 9T.

How to install Stock Firmware on Xiaomi Poco F3

Follow the pre-requisites and install the required drivers and tools on your PC before installation.


Download Flash Files:

For Global Variants


Recovery ROM | Fastboot ROM


Recovery ROM | Fastboot ROM


Recovery ROM | Fastboot ROM

For Europe Variants:


Recovery ROM | Fastboot ROM


Recovery ROM | Fastboot ROM

Instructions to Flash The ROM:

We’ve provided two methods for installing MIUI Flash files on your Xiaomi Redmi 9T either use the recovery technique or use the Fastboot method. Below is a step-by-step guide to both methods:

Guide to Install MIUI ROM [Recovery/Fastboot]

I hope you were able to successfully install the stock ROM on your Xiaomi Redmi 9T (alioth). Please rate this page and leave a comment. We are always open to suggestions and improvements.

Hi, I am Muhammad Tayyab known as Vampire Hacker from Narowal, Pakistan. I love to face Technical Challenges.

Leave a Reply

Most Popular