Xiaomi Redmi 10T Lite Stock Firmware Flash File. This page will contain all of the latest firmware flash files for the Xiaomi Mi 10T-Lite 5G (codenamed Gauguin). Xiaomi Mi Flash Tool, which works on Windows, Mac, and Linux, is required to flash the firmware file. To flash the firmware stock ROM file on the Mi 10T Lite 5G, follow this instruction.
The Chinese original equipment manufacturer Xiaomi just unveiled the Mi 10T series, which includes the Mi 10T, Mi 10T Pro, and Mi 10T Lite. The Mi 10T Lite is the lower or smaller variation of the Mi 10T series, as the name suggests. These three devices are the successors of the Mi 10 series. We’ll discuss the Lite edition here, which, most crucially, features 5G connectivity. Let’s have a look at the gadget specifications now.
Table of Contents
Xiaomi Redmi 10T Lite Stock Firmware Flash File
Mi 10T Lite 5G Device Overview:
The Xiaomi Mi 10T Lite features a 6.67-inch IPS LCD display with a resolution of 1080×2400 pixels, a 20:9 aspect ratio, Corning Gorilla Glass 5 protection, HDR10, 120Hz refresh rate, and 450 nits of average brightness, among other features. It has an octa-core Qualcomm Snapdragon 750 5G SoC, Adreno 619 GPU, 6GB RAM, and 64GB (UFS 2.1) / 128GB (UFS 2.2) internal storage, and runs on Android 10 with MIUI 12 preloaded.
Advantages of Stock ROM:
The reasons why you should download and save the Redmi 10T Lite Stock ROM flash file to your PC are as follows.
- You may use the Stock ROM file to unbrick your smartphone if it’s dead.
- DB files from Stock ROM may be used to fix or repair the IMEI on your device.
- Remove any viruses or adware from your Redmi 10T Lite smartphone.
- The boot loop issue of the Redmi 10T Lite may be resolved. On the Redmi 10T Lite, the app has unfortunately ceased working.
- Fix a network-related problem
- Using Magisk, patch the Boot image to the root directory.
- The Redmi 10T Lite may be unrooted.
- To Reset or Remove FRP on your smartphone, follow these steps:
- Restore the factory settings of the Redmi 10T Lite.
How to install Stock Firmware on Xiaomi Mi 10T Lite 5G
Follow the pre-requisites and install the required drivers and tools on your PC before installation.
Pre-Requirements:
- This is the Xiaomi Redmi 10T Lite Flash File.
- A functioning Windows PC/Laptop is required.
- For Windows and Mac, download and install the newest Xiaomi USB Driver.
- Install the Xiaomi Mi Flash tool on your computer (Fastboot Method)
- Before updating your phone, make sure it’s at least 50% charged.
- Make a full backup of your phone’s information.
Download Flash File
Flash File Name: V12.5.1.0.RJSTWXM
File Size: 2.4 GB
Region: Taiwan
Version: Android 11 | MIUI 12.5
Recovery ROM | Fastboot ROM
Flash File Name: V12.5.1.0.RJSMIXM
File Size: 2.4 GB
Region: Global
Version: Android 11 | MIUI 12.5
Recovery ROM | Fastboot ROM
Flash File Name: V12.0.1.0.RJSTWXM
File Size: 2.4 GB
Region: Taiwan
Version: Android 11 | MIUI 12
Flash File Name: V12.0.1.0.RJSEUXM
File Size: 2.4 GB
Region: Europe
Version: Android 11 | MIUI 12
Recovery ROM | Fastboot ROM
Flash File Name: V12.0.8.0.QJSEUXM
File Size: 2.4 GB
Region: Europe
Version: Android 10 | MIUI 12
Instructions to Flash The ROM:
We’ve provided two methods for installing MIUI Flash files on your Xiaomi Redmi 10T Lite either use the recovery technique or use the Fastboot method. Below is a step-by-step guide to both methods:
Guide to Install MIUI ROM [Recovery/Fastboot]
I hope you were able to successfully install the stock ROM on your Xiaomi Redmi 10T Lite (alioth). Please rate this page and leave a comment. We are always open to suggestions and improvements.
