Samsung Galaxy M11 (SM-M115F) Firmware Flash File Download. We’ve included the download link and instructions for installing the Samsung SM-M115F (Galaxy M11) firmware flash file using the Samsung Flash Tool on this page (Also known as Odin Flash Tool). Here you will find all of the stock firmware zip files for the Samsung SM-M115F in all of the supported locations.
This method is for you if you want to restore the device to its original factory firmware. You can use this method to address software-related issues like hard bricks, soft bricks, WiFi or Bluetooth difficulties, lag or stutter, and even downgrade your device at any moment.
Table of Contents
Samsung Galaxy M11 (SM-M115F) Firmware Flash File Download
Samsung Galaxy M11 SM-M115F Flash Files:
Flash File Name: SM-M115F_M115FXXU2BUD8_11.0_file.zip
Build Number: M115FXXU2BUD8
Security Patch: April 2021
Model: SM-M115F
Android Version: 11
Flash File Name: SM-M115F_M115FXXU1ATL2_10.0_file.zip
Build Number: M115FXXU1ATL2
Security Patch: December 2020
Model: SM-M115F
Android Version: 10.
Flash File Name: SM-M115F_M115FXXU1ATJ2_10.0_file.zip
Build Number: M115FXXU1ATJ2
Security Patch: October 2020
Model: SM-M115F | Region: Global
Android Version: 10.0
Flash File Name: SM-M115F_M115FXXU2ATJ5_10.0_file.zip
Build Number: M115FXXU2ATJ5
Security Patch: October 2020
Model: SM-M115F | Region: Global
Android Version: 10.0
Steps to Flash Stock ROM File on Galaxy M11 SM-M115F
Let’s have a look at the pre-requirements before we get started with the procedures to install stock firmware on your Samsung Galaxy M11.
Pre-Requirements:
- This Guide is for Samsung Galaxy M11 SM-M115F
- To flash firmware, you’ll need a Windows PC/Laptop and a USB cable.
- Charge your device till it has a minimum of 50% battery life.
- You must download and install the most recent Samsung USB Drivers on your computer.
- Check to see if you have the ODIN software installed on your computer.
- Before you do anything, make a backup of your device (no root).
Let’s look at how to flash a stock ROM on a Samsung Galaxy M11.
- Download the Samsung SM-M115F flash file
- The contents of the firmware flash file zip should be extracted.
- Start the ODIN program.
- In the appropriate section, load the firmware files.
- Connect your phone to the computer once it has loaded (make sure to boot your device into download mode)
- When you connect your phone to Odin, the CO port will light up.
- To install the firmware on your Samsung device, press the Start button.
- That concludes our discussion. Once the installation is complete, you will see a PASS message.
 Firmware Flash File Download. We've included the download link and instructions for installing the Samsung){kind=link}